Informational Handouts: Site Plan Grid Plan Review and Inspection Information: Plan Review and Inspection Reference Guide 2006 Washington Energy Code Prescriptive Compliance Form Building Information: Before You Build Guide Building/Construction Design Code and Graphics            Drawings and table illustrating code requirements for           residential and building construction Building Final Inspection Checklist Contractor Information regarding Pre-Approved Plan Program Frequently Asked Questions Hiring a Contractor or Remodeler      Basics for Homeowners: Guide to Hiring a Contractor Structures Built Prior to Permit Guideline Truss Design Drawings and Specification Review Information International Building Code Graphics Construction Drawings (Figure 1) Typical Foundation Wall (Figure 2) Reinforced Foundation Wall (Figure 3) Concrete Retaining Wall (Figure 4) Typical Accessory Foundations (Figure 5) Isolated Footings (Figure 6) Concrete Masonry Unit Wall (Figure 7) Wood to Concrete Separation (Figure 9) Cutting & Notching Wall Studs (Figure 10) Cutting & Notching Floor Joists (Figure 11) Stair/Handrail (Figure 12) Monopour Foundation (Figure 13) Propane Tank Setbacks (Figure 15) Deck Construction (Figure 20) Porch Construction (Figure 21) Exterior Door Landings (Figure 23) Landing Construction (Figure 24) Conventional Light Frame Lateral Bracing (Figure 30) Identifying Buildings of Irregular Shape (Figure 31) IRC Alternate Braced Panel (Figure 32) Nailing Schedule (Figure 33) Alternate Fasteners (Figure 34) IRC R60210112 Exception 1 (Figure 35) Plumbing DWV (Figure 40) Generic Garage Plan (Figure 50) Pole Barn (Figure 60) Typical Carport (Figure 62) Exempt Building Use and Setbacks (Figure 80)